I. Environmental Control Systems Inspection, Repair, and
Troubleshooting
1. Cabin heat and exhaust heat exchangers
d. Factors affecting cabin heat
e. Inspection, check, and troubleshooting procedures
f. Service and repair procedures
2. Cabin heat and combustion heaters
g. Electrical control and schematics
h. Inspection, check, and troubleshooting procedures
i. Service and repair procedures
4. Compressors and bleed air
B. Pressure, temperature, and volume of an air mass
4. Temperature conversions
1. Vapor cycle air-conditioning (freon)
k. Inspection, check, and troubleshooting procedures
l. Service and repair procedures
2. Air cycle air-conditioning
d. Filters and shut-off valves
e. Primary heat exchanger
g. Secondary heat exchangers
m. System servicing and troubleshooting
D. Pressurization systems
4. Pressure vessel characteristics
9. Operation, inspect, check, and troubleshoot
2. Oxygen requirements in pressurized and unpressurized
aircraft
3. Types of oxygen systems
b. Mechanically-separated oxygen
7. Oxygen systems inspection, repair, and troubleshoot
b. Operation, servicing, and troubleshooting
c. Portable oxygen system
d. Emergency breathing apparatus
II. Airframe Ice and Rain Control Inspection, Repair, and
Troubleshooting
A. Overview: types of ice and rain conditions
2. Types of structural ice
3. Categories of severity
D. Thermal anti-ice systems
1. Components and operation
F. Chemical deice or anti-ice
G. Windshield ice and rain control
5. Windshield wipers and rain repellent
H. Miscellaneous electric anti-iced components
1. Other electrically heated elements
2. Components of electric deice systems
3. Inspections and servicing of electric deice systems
III. Aircraft Fire Detection and Extinguishing System Inspection
2. Properties and effects of extinguishing agents
4. Illegal or outdated types
6. Inspection and servicing procedures
C. Aircraft fire protection and detection
1. Definitions per Part 1
2. Federal Aviation Regulation 23.1203, Fire Detectors Required
7. Continuous loop or continuous length systems
9. Carbon monoxide detectors
D. Built-in fire extinguishing systems
E. Inspection of fire protection and detection systems
6. Fire detection test indication
|